QGH-SMART fly ash block making machine
QGH Smart Plant

QGH Smart Specifications

Hydraulic Pressing Capacity 40 Ton
No Bricks Produced/Stroke 03 Nos.
No. Of Cycle/Min06 Cycles
Total Connected Load20 HP
Hydraulic Oil - Grade - 68 250 Liters
Pallet Size450 mm x 300 mm x 18 mm Thk
Pan Mixer Size300 kgs.
Pre-feed SystemOptional (Power -2HP)
Operation ControlPLC Based Automatic

QGH Smart Capacity

Bricks SizeNo. Of Bricks Hr
230 x 110 x 751000
250 x 120 x 751000
190 x 90 x 901460

Our Successful Installation

About QGH SMART Fly Ash Brick Machine

QGH SMART fly ash brick machine is one of our initiator products and has been widely accepted by customers. This product was brought to the market to establish best product quality and market leadership. This fly ash brick machine is suitable for those who want more than 10000-12000 brick production per shift. With about 6% cement, you derive the strength of an M8 brick and since it is a mold-pressing machine, it does not lose pressure in any regard. It is to be noted that we maintain an oil pressure of 160 bar.

QGH SMART fly ash brick machine comes with an 40-ton hydraulic pressing capacity with the capacity to produce 6 bricks per stroke. It has 6 cycles per minute and can support a pallet size of 450 mm x 300 mm x 18 mm. The set up has the provision for an optional pre-feed system and 1000 kg pan mixer. The machine can make different fly ash bricks quantities depending on the brick size.

For a fly ash bricks size with 230 x 110 x 75 dimension, the machine can make 1000 bricks per hour. For a brick size with 250 x 120 x 75dimension, the machine can make 1000 bricks per hour. For a brick size with 190 x 90 x 90 dimension, the machine can make 1460 bricks per hour.

This fly ash bricks machine has been successfully installed in West Bengal, Orissa, Andhra Pradesh etc.

Translate »